Xenon Lamp Aging Environmental Test Chamber
Applications:
- Plastics industry: used to test the UV resistance of plastic products, including automotive parts, outdoor products, etc.
- Paint industry: evaluate the weather resistance and color stability of paint.
- Textile industry: test the anti-fading and anti-aging ability of textiles.
- Electronics industry: evaluate the durability of electronic product housings and screens.
Advantages:
- High efficiency: Compared with natural aging, the xenon lamp aging environment test chamber can greatly shorten the test time.
- High accuracy: The light conditions simulated by the test chamber are very close to natural light, so the test results are more accurate.
- Flexibility: The xenon lamp aging test can adjust the light intensity and test time as needed to meet different test requirements.
Size and Standards:
| Inner box size | W800*H800*D800mm (drum diameter 500mm sample fixture width 75*height 150*thickness 5mm can put about 40) |
| Outer case size | W1350*H2050*D1850mm subject to the object. |
| Sample condition | Sample placement test space is not more than three quarters of the total space, no heat load. |
| Applied Standards | IEC60068, ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2412 |
Equipment Performance:
| Temperature range inside the box | 0℃～80℃ |
| Blackboard temperature range | +45℃～100℃(±3℃)Depending on the temperature inside the box and the irradiation intensity settings |
| Box temperature deviation | ±2℃(without light on) |
| Temperature resolution | 0.1°C |
| Temperature Fluctuation | ±0.5℃(without light) |
| Relative humidity range | 20% to 95% R.H |
| Relative humidity deviation | ±3%R.H (without light) |
| Relative humidity fluctuation | ±2.5%R.H (without light) |
| Light source type | Water-cooled xenon lamp wavelength 280-800nm, power 4.5KW, average service life of 1200 hours, equipped with a set of light monitoring and feedback sensors, does not contain a filter. (The equipment comes with lamp cooling circulating water) |
| Irradiation intensity | @340nm irradiation intensity 0.35 ~ 0.6W/m2 adjustable |
| Rotation speed | 1-9RPM |
| Rain function | Support internal and external spray, can be indirect spray, continuous spray. |
| Function Mode | Irradiation mode, dark mode, spray mode can be alternately cycle operation. |
| ※The above performance was measured under the conditions of ambient temperature 25℃±3℃, relative humidity ≤85% unloaded without specimen. | |
structural characteristic:
| Controller characteristics | (1) Hardware architecture: PLC listed Xindjie XD5 series + MCGS 7-inch human-machine interface touch screen
(2) Software developed independently by BONAD (expandable and powerful, can be customised according to the requirements of non-standard change software) (3) Flat design, easy to operate. |
| Control mode | ●Programmes: 50 groups of programmes, each group of programmes has 50 segments, you can set all cycles of the programme, part of the cycle, programme connection, set the end-of-programme action, set the standby action. ●Determined value: running time and running conditions can be set. |
| Sensors | PT100 3-wire high accuracy sensor |
| Analogue output | Voltage pulse (SSR) 2 points, DC 24V, minimum pulse width 5ms. |
| Communication interface | ●USB: The controller can download historical curves and historical data, historical data is saved in Excel format, you can download the required data by date. Historical data is saved in JPG image format, which can be enlarged, reduced and then downloaded as required. ●RS485 interface |
safety device:
| Electrical control system | ●Heating and humidification over-temperature protection ●Overload short circuit leakage protection ●Blower over-current protection ●Lamp over-temperature protection ●Water shortage protection ●Power shortage reverse phase protection ●Shower pump overcurrent protection |
| Refrigeration system | ●Compressor overcurrent protection ●Compressor overpressure protection ●Compressor overtemperature protection |
